Blog

  • American Critical Minerals Confirms Annual Renewal of all Potash Licenses and Lithium Claims across the Green River Project

    VANCOUVER, BC / ACCESS Newswire / September 29, 2025 / American Critical Minerals Corp. (“American Critical Minerals” or the”Company“) (CSE:KCLI)(OTCQB:APCOF)(Frankfurt:2P3) is pleased to confirm that it has made the required annual payments to renew its 100% interest in 11 State of Utah (“SITLA“) Mineral and Minerals Salt Leases covering approx. 7,050 acres, 1,094 Federal Lithium Brine Claims (BLM Placer Claims) covering approx. 21,150 acres, and 11 Federal (BLM) Potash Prospecting Permits covering approx. 25,480 acres. Through these leases, permits and claims the Company has the ability to explore for, and develop, potash and lithium and associated by-products (including Bromine and Boron) across the entire Green River Project (approx. 32,530 acres).

    The Company has Permits in place to drill 3 holes on its State of Utah Leases following the payment of required reclamation bonding in respect of these holes. In addition, under the Plan of Operations approved by the BLM in October 2024, the Company is also authorized to drill 4 holes across its Federal (BLM) acreage. The Company has now finalized with the BLM and the Utah Department of Natural Resources, the additional reclamation bonding required to receive final permits to drill these 4 additional holes. Once this additional bonding is paid by the Company it will be in position to drill up to 7 holes in total across the Green River Project.

    Unlike its near neighbors, who are focused on either potash production (Intrepid Potash: https://www.intrepidpotash.com) or advanced lithium development (Anson Resources: https://www.ansonresources.com), the Company is looking to develop both potash and lithium. Historic oil and gas wells, and development work contiguous to the Company’s Green River Project, have highlighted the potential for both Critical Minerals and the Company will test for both potash and lithium in each hole it drills. * **

    Management Commentary

    Simon Clarke President & CEO stated, “we are pleased to continue to make strong progress operationally as we continue to position the Company to launch drilling to confirm the historic values obtained in the oil and gas wells drilled across, and around, our acreage. We will be targeting the same potash cycles that our near neighbour, Intrepid Potash, has been producing from for decades and given our Project is contiguous with Anson’s project to the North and adjacent to their project to the South, we are highly confident that “as the meat in the sandwich” we will experience similar results on the lithium side. Speaking of Anson, I would like to commend them for their continued strong performance. Their MOU with POSCO Holdings and their definitive offtake agreement with LG Energy Solution, both major players in the lithium-Ion Battery space, are impressive and provide strong validation of the Paradox Basin as a major source of high-quality lithium.

    In the interim, we are excited to continue to progress work with Agapito Associates LLC (announced in late July 2025) to define a 43-101 Exploration Target for lithium reflecting the growing importance of lithium in the Paradox and its potential at Green River. This work will also lead to our 43-101 Technical Report** being updated and refreshed and will provide us with 43-101 Exploration Targets for both critical minerals as we position ourselves for confirmation and resource Drilling. We expect to be able to finalize this work with Agapito in the near future.”

    Granting of Incentive Securities

    The Company also announces that it has granted an aggregate of 660,000 incentive stock options (the “Options”) to certain of its directors, officers and key advisors. The Options vest over a period of one year and each Option is exercisable to acquire one common share at $0.38 for a period of 5 years from the date of grant. In addition, the Company has granted an aggregate of 540,000 Restricted Share Units (“RSUs”) to certain of its directors, officers and key advisors. The RSUs vest and convert into an equivalent number of common shares after thirty-six months, subject to accelerated vesting in the event the closing price of the common shares of the Company is $0.875 or greater at any time, or upon the occurrence of a change of control event for the Company.

    About American Critical Minerals’ Green River Potash and Lithium Project

    The Green River Potash and Lithium Project is situated within Utah’s highly productive Paradox Basin, located 20 miles northwest of Moab, Utah and has significant logistical advantages including close proximity to major rail hubs, airport, roads, water, towns and labour markets. It also benefits from close proximity to the agricultural and industrial heartland of America and numerous potential end-users for its products.

    The history of oil and gas production across the Paradox Basin provides geologic data from historic wells across the Project, and the wider Basin, validating and de-risking the potential for high grade potash and large amounts of contained lithium. Wells in and around the project reported lithium up to 500 ppm, bromine up to 6,100 ppm and boron up to 1,260 ppm (Gilbride & Santos, 2012). This data is reinforced by nearby potash production and the advanced stage of neighbouring lithium projects. The Paradox Basin is believed to contain up to 56 billion tonnes of lithium brines, potentially the largest such resource in US (Source: Anson Fastmarkets Presentation – https://wcsecure.weblink.com.au/pdf/ASN/02823465.pdf ) The Company also has a 43-101 Exploration Target of 600 million to 1 billion tonnes of sylvinite (the most important source for the production of potash in North America) with average grades ranging from 19% to 29% KCL.**

    The Company holds a 100% interest in eleven State of Utah (“SITLA“) mineral and minerals salt leases covering approximately 7,050 acres, 1,094 federal lithium brine claims (BLM Placer Claims) covering 21,150 acres, and 11 federal (BLM) potash prospecting permits covering approximately 25,480 acres. Through these leases, permits and claims the Company has the ability to explore for potash, lithium and potential by-products across the entire Green River Project (approx. 32,530 acres). The Company is authorized to drill a total of 7 drill holes across the Project (pending bonding the recently approved 4 drill holes).

    Intrepid Potash, Inc. is America’s largest potash company and only U.S. domestic potash producer and currently produces potash from its nearby Moab Solution Mine, which the Company believes provides strong evidence of stratigraphic continuity within this part of the Paradox Basin (www.intrepidpotash.com). Anson Resources Ltd. has advanced lithium development projects contiguous to the northern boundary of our Green River Project and neighbouring to the south. Anson has a large initial resource, robust definitive feasibility study and has recently completed successful piloting operations through its partnership with Koch Technology Solutions, as well as an offtake agreement with LG Energy Solution. The Anson exploration targets encompass the combined Mississippian Leadville Formation and the Pennsylvanian Paradox Formation brine-bearing clastic layers, which also underlie American Critical Minerals’ entire project area (www.ansonresources.com)*.

    In 2022, the U.S. imported approx. 96.5% of its annual potash requirements with domestic producers receiving a higher sales price due to proximity to market (intrepidpotash.com/ August 15, 2024, Investor Presentation). In March 2024, the US Senate introduced a bill to include key fertilizers and potash on the US Department of Interior list of Critical Minerals which already includes lithium, and this process is well advanced with potash being added to the USGS Draft Critical Minerals List. In August 2025. Recent market estimates suggest that the global potash market is over US$50 billion annually and growing at a compound annual growth rate (“CAGR”) of close to 5%. Annual lithium demand is now estimated to be over 1 million tonnes globally and continuing to grow rapidly. * **

    On behalf of the Board of Directors

    Simon Clarke, President & CEO

    Contact: (604)-551-9665

    *American Critical Minerals’ management cautions that results or discoveries on properties in proximity to the American Critical Minerals’ properties may not necessarily be indicative of the presence of mineralization on the Company’s properties.

    **A report titled “NI 43-101 Technical Report – Green River Potash Project, Grand County, Utah, USA”, prepared by Agapito Associates Inc., and dated effective September 12, 2012, quantifies the Green River Potash Project’s potash exploration potential in the form of a NI 43-101 Exploration Target. The Exploration Target estimate was prepared in accordance with the National Instrument 43-101 -Standards of Disclosure for Mineral Projects (“NI 43-101“). It should be noted that Exploration Targets are conceptual in nature and there has been insufficient exploration to define them as Mineral Resources, and, while reasonable potential may exist, it is uncertain whether further exploration will result in the determination of a Mineral Resource under NI 43-101. The Exploration Target stated in the Agapito Report is not being reported as part of any Mineral Resource or Mineral Reserve. A copy of the report can be accessed on the corporate website for the Company: www.acmineralscorp.com.

    ***United States Geological Survey, Mineral Commodity Summaries, January 2024 (https://pubs.usgs.gov/periodicals/mcs2024/mcs2024-potash.pdf).

    Cautionary Statements Regarding Forward Looking Information
    This news release contains forward-looking information within the meaning of applicable securities legislation. Forward-looking information is typically identified by words such as: believe, uncertainties and other factors that could cause actual events or results to differ materially from those projected in the forward-looking information. Important factors that could cause actual results to differ from this forward-looking information include those described under the heading “Risks and Uncertainties” in the Company’s most recently filed MD&A. The Company does not intend, and expressly disclaims any obligation to, update or revise the forward-looking information contained in this news release, except as required by law. Readers are cautioned not to place undue reliance on forward-looking expect, anticipate, intend, estimate, postulate and similar expressions, or are those, which, by their nature, refer to future events. Such statements include, without limitation, statements regarding the intended use of proceeds from the Offering. Although the Company believes that such statements are reasonable, it can give no assurances that such expectations will prove to be correct. All such forward-looking information is based on certain assumptions and analyses made by the Company in light of their experience and perception of historical trends, current conditions and expected future developments, as well as other factors management believes are appropriate in the circumstances. This information, however, is subject to a variety of risks and information.

    SOURCE: American Critical Minerals Corp.

    View the original press release on ACCESS Newswire

  • GameSquare Urges Shareholders to Vote by October 6 on Proxy Proposals

    FRISCO, TEXAS / ACCESS Newswire / September 29, 2025 / GameSquare Holdings, Inc. (NASDAQ:GAME) (“GameSquare” or the “Company”) reminds shareholders of record as of September 5, 2025 of the Company’s upcoming annual meeting, which will be held on October 7, 2025 at 12:00 p.m. CT. Shareholders of record as of September 5, 2025 will be able to attend the Annual Meeting virtually by visiting https://meetnow.global/M2RRVHC.

    Shareholders are advised to vote their shares well in advance of the proxy voting deadline of 11:59 p.m. CT, on October 6, 2025. The proposals are included in the definitive proxy statement filed with the U.S. Securities and Exchange Commission. The proxy statement is available at: https://www.sec.gov/ix?doc=/Archives/edgar/data/1714562/000164117225026855/formdef14a.htm

    YOUR VOTE IS IMPORTANT NO MATTER HOW MANY SHARES YOU HOLD.

    THE BOARD OF DIRECTORS RECOMMENDS THAT SHAREHOLDERS VOTE FOR ALL DIRECTOR NOMINEES AND PROPOSED RESOLUTIONS

    Key Proxy Proposal: Technical Statutory Merger
    One of the proposals this year is the approval of a statutory merger with a wholly owned subsidiary. GameSquare will remain the surviving entity. This is a technical reorganization only and not a new merger or acquisition. The primary purpose of the merger is to adopt a restated set of articles of incorporation, which will provide the Company with greater flexibility to pursue future growth and opportunities.

    Approval of this proposal will allow GameSquare to:

    • Modernize and simplify its governing documents

    • Provide flexibility to support future growth and capital markets initiatives

    • Align its governance framework with current market practices

    Other Proxy Proposals
    In addition to the statutory merger, shareholders are being asked to consider:

    • Election of Directors with the expertise to provide strong oversight and leadership

    • Ratification of Independent Auditors to reinforce confidence in GameSquare’s financial reporting

    • Equity and Governance Matters that support attracting and retaining talent, aligning management incentives with shareholders, and strengthening corporate governance

    Your Vote Matters
    Every shareholder’s vote is important, regardless of the number of shares owned. Shareholders are strongly encouraged to vote as soon as possible online, by telephone, or by mailing their proxy card, as outlined in the proxy materials.

    Shareholder Questions and Voting Assistance
    Shareholders who have any questions or require assistance with voting may contact the Company’s proxy solicitation agent and shareholder communications advisor:

    Laurel Hill Advisory Group
    Toll Free (North America): 1-888.742.1305
    International: +1-416-304-0211
    By Email: Jdepinto@laurelhill.com

    About GameSquare Holdings, Inc.
    GameSquare (NASDAQ: GAME) is a cutting-edge media, entertainment, and technology company transforming how brands and publishers connect with Gen Z, Gen Alpha, and Millennial audiences. With a platform that spans award-winning creative services, advanced analytics, and FaZe Clan Esports, one of the most iconic gaming organizations, we operate one of the largest gaming media networks in North America. As a digital-native business, GameSquare provides brands with unparalleled access to world-class creators and talent, delivering authentic connections across gaming, esports, and youth culture. Complementing our operating strategy, GameSquare has developed an innovative treasury management program designed to generate yield and enhance capital efficiency, reinforcing our commitment to building a dynamic, high-performing media company at the intersection of culture, technology, and next-generation financial innovation.

    To learn more, visit www.gamesquare.com.

    Forward-Looking Information

    This news release contains “forward-looking information” and “forward-looking statements” (collectively, “forward-looking statements”) within the meaning of the applicable securities legislation. All statements, other than statements of historical fact, are forward-looking statements and are based on expectations, estimates and projections as at the date of this news release. Any statement that involves discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions, future events or performance (often but not always using phrases such as “expects”, or “does not expect”, “is expected”, “anticipates” or “does not anticipate”, “plans”, “budget”, “scheduled”, “forecasts”, “estimates”, “believes” or “intends” or variations of such words and phrases or stating that certain actions, events or results “may” or “could”, “would”, “might” or “will” be taken to occur or be achieved) are not statements of historical fact and may be forward-looking statements. In this news release, forward-looking statements relate, among other things, to: the Company’s future performance, returns generated by its business strategies, revenue, growth and profitability; and the Company’s ability to execute on its current and future business plans. These forward-looking statements are provided only to provide information currently available to us and are not intended to serve as and must not be relied on by any investor as, a guarantee, assurance or definitive statement of fact or probability. Forward-looking statements are necessarily based upon a number of estimates and assumptions which include, but are not limited to: the Company’s 2025 annual meeting of shareholders (the “Annual Meeting”) and corporate governance, the Company’s ability to grow its business and being able to execute on its business plans and strategies, the success of Company’s vendors and partners in their provision of services to the Company, the Company being able to recognize and capitalize on opportunities and the Company continuing to attract qualified personnel to supports its development requirements. These assumptions, while considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking statements. Such factors include, but are not limited to: the Company’s annual meeting and corporate governance, its ability to achieve its objectives, the Company successfully executing its growth strategy, the ability of the Company to obtain future financings or complete offerings on acceptable terms, failure to leverage the Company’s portfolio across entertainment and media platforms, dependence on the Company’s key personnel and general business, economic, competitive, political and social uncertainties. These risk factors are not intended to represent a complete list of the factors that could affect the Company which are discussed in the Company’s most recent MD&A. There can be no assurance that forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on the forward-looking statements and information contained in this news release. GameSquare assumes no obligation to update the forward-looking statements of beliefs, opinions, projections, or other factors, should they change, except as required by law.

    Corporate Contact
    Lou Schwartz, President
    Phone: (216) 464-6400
    Email: ir@gamesquare.com

    Investor Relations
    Andrew Berger
    Phone: (216) 464-6400
    Email: ir@gamesquare.com

    Media Relations
    Chelsey Northern / The Untold
    Phone: (254) 855-4028
    Email: pr@gamesquare.com

    SOURCE: GameSquare Holdings, Inc.

    View the original press release on ACCESS Newswire

  • IRS Raises Penalties for Misclassifying Workers – Clear Start Tax Warns Employers About Contractor vs. Employee Risks

    Businesses face heightened fines in 2025 as the IRS steps up enforcement on worker classification errors

    IRVINE, CA / ACCESS Newswire / September 29, 2025 / The IRS is increasing penalties for businesses that misclassify employees as independent contractors, a move that could significantly raise costs for employers who fail to follow proper guidelines. The change comes as the agency intensifies efforts to ensure payroll tax compliance, especially in industries that rely heavily on gig or contract labor.

    “Misclassifying workers isn’t just a paperwork mistake – it can lead to thousands in back taxes, interest, and penalties,” said a spokesperson for Clear Start Tax. “The IRS is sending a strong signal in 2025 that businesses need to take classification rules seriously.”

    Clear Start Tax noted that companies often misclassify workers to avoid paying payroll taxes, unemployment insurance, and benefits. However, the IRS has expanded its audit focus to spot patterns of abuse, relying on both tip-offs and advanced data analysis.

    “Employers should not assume they can fly under the radar anymore,” the spokesperson added. “The IRS is paying close attention, and penalties are increasing. Properly determining whether a worker is an employee or an independent contractor is critical to avoiding serious consequences.”

    By answering a few simple questions, taxpayers can find out if they’re eligible for the IRS Fresh Start Program and take the first step toward resolving their tax debt.

    Small businesses, construction firms, and companies using large freelance networks are particularly at risk. Experts say the safest step is to review contracts and job duties under IRS guidelines before filing 2025 returns.

    About Clear Start Tax
    Clear Start Tax is a national tax resolution firm that helps individuals and businesses navigate complex IRS challenges. From audits and back taxes to payroll issues and tax relief programs, the firm provides tailored solutions to reduce risk and resolve debt while ensuring compliance.

    Need Help With Back Taxes?
    Click the link below:
    https://clearstarttax.com/qualifytoday/
    (888) 710-3533

    Contact Information
    Clear Start Tax
    Corporate Communications Department
    tech@clearstarttax.com
    (949) 800-4011

    SOURCE: Clear Start Tax

    View the original press release on ACCESS Newswire

  • dHealth Intelligence Launches Revolutionary AI Agent That Transforms Personal Healthcare Management

    dHealth Intelligence Launches Revolutionary AI Agent That Transforms Personal Healthcare Management

    ZURICH, SWITZERLAND / ACCESS Newswire / September 29, 2025 / Healthcare AI startup dHealth Intelligence just unveiled an AI agent that consolidates fragmented medical data & provides advice based on it, while protecting patient privacy. Available now as a free desktop download, the platform transforms scattered medical records, fitness data, and doctor’s notes into a unified health narrative through simple user commands. It also provides fully private AI medical consultations. Mobile versions arrive Q1 2026. Follow development updates @dHealth_Network.

    The company, with proven partnerships alongside pharmaceutical giants Roche, Novartis, and Eli Lilly, tackles healthcare’s core problems: medical data fragmented across countless disconnected systems, and the lack of truly private AI health consultations.

    Your medical history exists in pieces across hospital databases, wearable dashboards, handwritten notes, half-remembered doctor visits. Even the most competent physician can’t piece it together. dHealth’s solution weaves these disconnected threads into a unified medical narrative, entirely hands-free.

    The platform’s security architecture creates what the company calls a “personal cryptographic fortress” for each user’s medical information. Sensitive health data remains under individual control while still allowing authorized sharing with healthcare providers and researchers when explicitly permitted.

    Core Capabilities

    Voice a symptom, upload medical imaging, or sync a fitness device-the agent interprets every data point, converting raw inputs into standardized medical formats. When specialists or insurance providers need access, the system validates credentials, translates complex permissions into plain language for user approval, and maintains an immutable record of consent decisions.

    The system continuously evolves beneath the surface. dHealth benchmarks emerging AI models and automatically upgrades the infrastructure when superior technology emerges. Users interact with perpetually cutting-edge technology without confronting its complexity.

    Proven Track Record

    dHealth’s credibility stems from real-world implementations across continents. Beyond partnerships with top pharmaceutical companies, the team has developed a COVID early-detection system for Sub-Saharan Africa with Novartis, a vaccine supply chain tracking system for West Africa in collaboration with Swiss Tropical and Public Health Institute, and co-created the CENTIVA LIFE platform with Roche for rare disease research. Three weeks ago, dHealth secured a partnership with Spitex Biel, Switzerland’s largest home care organization, to pilot AI-powered nursing documentation.

    Getting Started

    Basic functionality and fully private medical consultations through the AI interface cost nothing.

    Premium features, including unlimited storage and advanced memory features, cost $50 annually. Organizations can sponsor community access as well as receive volume discounts

    Healthcare Outcome Markets, currently in development, will transform medical research into a participatory ecosystem where anyone can stake predictions on treatment outcomes. While pharmaceutical companies gain crucial risk management for extremely expensive trials, enabling them to hedge their risks, everyday people gain unprecedented access to a prediction market in healthcare.

    The desktop agent’s launch is merely the first step for dHealth Intelligence. It marks a critical inflection point. As individuals embrace this highly effective and useful technology, healthcare institutions will follow, drawn by the growing network of data-empowered patients ready to take control of their health journey.

    About dHealth

    Founded in 2017 and based in Switzerland, dHealth pioneers privacy-first healthcare technology that puts patients in control of their medical data. The team has established partnerships with the world’s largest and most renowned pharmaceutical companies, universities, and research centers, and has deployed solutions across continents. From vaccine tracking in West Africa to rare disease research platforms with Roche, the dHealth team continues to deliver cutting-edge technology with the AI agent being its latest release. For more information, visit www.dhealth.com.

    Media Contact: Filip Milneršić, filip@dhealth.com

    SOURCE: dHealth

    View the original press release on ACCESS Newswire

  • SMX Technology Can Enforce the COP 29 and UN Sustainability Wish List (NASDAQ:SMX)

    NEW YORK, NY / ACCESS Newswire / September 29, 2025 / Three decades. Twenty-nine global conferences. Billions poured into hotels, banquets, travel, and stagecraft. And to be fair, these gatherings weren’t in vain. They brought the world’s attention to plastics, sustainability, and safety in a way that no single company or country could have done alone. Ambition was never the problem. The intent was real. But after all the speeches and pledges, what do we still see? Plastics burned instead of recycled. Landfills bursting at the seams. Safety standards that collapse under stress tests.

    This is the cost of promises without proof – and it is staggering. Every ton of plastic incinerated instead of recycled carries not just an environmental price, but a financial one: wasted material, wasted energy, wasted opportunity. Every fire that spreads because a flame retardant existed only on paper brings lawsuits, insurance payouts, and communities left picking up the pieces. COP 29, like the 28 before it, showed the world can agree on goals. What it hasn’t delivered is the enforcement to back them up.

    The world doesn’t need another set of pledges. It needs systems that can verify and enforce the pledges already made. That’s where technology steps in. And it’s why SMX (NASDAQ:SMX) is not waiting for the next plenary hall – it’s delivering enforcement at the molecular level today.

    The Price Tag of 29 “To Be Continued” Episodes

    Let’s talk numbers. The OECD estimates that plastic pollution already costs the global economy billions of dollars annually in clean-up, lost tourism, and health impacts. Recycling programs burn through public budgets but return little value when much of the material is unverifiable. Insurers and manufacturers spend billions more covering losses from materials that were marketed as safe but proved otherwise in real-world fires, such as the Grenfell and Lacrosse Tower tragedies.

    What those losses share is a single root: lack of proof. Recycling programs collapse because no one can verify the content. Fire safety claims fail because datasheets are accepted as gospel instead of being tested in the field. For thirty years, conferences promised to bridge that gap. They never did. The receipts of inaction are piling up in lawsuits, landfill fees, and lost trust.

    That is the economic hole SMX was designed to fill.

    Proof That Pays; It’s Currency

    By embedding molecular markers into plastics and materials, SMX transforms verification from an afterthought into the product itself. A single scan can confirm recycled content, prove the integrity of flame-retardant materials, and expose those under-the-radar plastics, such as carbon black, that once slipped through every recycling system.

    This shift changes the math. Instead of regulators spending money to chase violators, markets reward verified compliance in real time. Verified recycled plastics command higher prices. Verified fire-resistant panels lower liability and insurance costs. And verified under-the-radar plastics, once written off as worthless, become tradable assets that re-enter supply chains.

    Proof doesn’t just save money – it creates value. It turns circularity from a line item on a sustainability report into a revenue-generating, risk-reducing system that benefits governments, industries, and consumers alike.

    Singapore, Europe, and expanding

    This isn’t just theory. In Singapore, SMX has already partnered with A*STAR to roll out a national plastics passport. Every piece of plastic now carries a digital twin tied to molecular proof. Policymakers no longer have to accept self-reported recycling rates. They have enforcement embedded in the material itself.

    Europe is next, where SMX’s planned collaboration with REDWAVE will bring verification onto factory floors. Instead of post-hoc audits, compliance becomes continuous and live. Even those pesky plastics that haunted the system for decades are tracked, verified, and priced.

    And in North America, interest from the North American Flame Retardant Alliance (NAFRA) extends this system into fire safety. A scan verifies flame-retardant protection in real time, turning one of the most lawsuit-prone industries into one of the most enforceable.

    The Price of Inaction is Too High

    COP 29 should have been the wake-up call, but the truth is it was just another expensive snooze button. The world doesn’t need more rhetoric. It doesn’t need more glossy targets. It needs proof that works in the field, on the factory floor, and in the marketplace.

    That’s what SMX is delivering. Proof that stops billions from being wasted on incineration and landfills. Proof that reduces the liability of catastrophic fires. Proof that turns once-buried plastics into verified commodities. Proof that makes circularity enforceable instead of aspirational.

    Three decades of inaction have cost the world enough. The next decade must be different. With SMX’s molecular markers, it can finally be: One scan. Two proofs. Inaction priced out of existence.

    About SMX

    As global businesses face new and complex challenges relating to carbon neutrality and meeting new governmental and regional regulations and standards, SMX is able to offer players along the value chain access to its marking, tracking, measuring and digital platform technology to transition more successfully to a low-carbon economy.

    Forward-Looking Statements

    The information in this press release includes “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include, but are not limited to, statements regarding expectations, hopes, beliefs, intentions or strategies regarding the future. In addition, any statements that refer to projections, forecasts or other characterizations of future events or circumstances, including any underlying assumptions, are forward-looking statements. The words “anticipate,” “believe,” “contemplate,” “continue,” “could,” “estimate,” “expect,” “forecast,” “intends,” “may,” “will,” “might,” “plan,” “possible,” “potential,” “predict,” “project,” “should,” “would” and similar expressions may identify forward-looking statements, but the absence of these words does not mean that a statement is not forward-looking. Forward-looking statements in this press release may include, for example: matters relating to the Company’s fight against abusive and possibly illegal trading tactics against the Company’s stock; successful launch and implementation of SMX’s joint projects with manufacturers and other supply chain participants of gold, steel, rubber and other materials; changes in SMX’s strategy, future operations, financial position, estimated revenues and losses, projected costs, prospects and plans; SMX’s ability to develop and launch new products and services, including its planned Plastic Cycle Token; SMX’s ability to successfully and efficiently integrate future expansion plans and opportunities; SMX’s ability to grow its business in a cost-effective manner; SMX’s product development timeline and estimated research and development costs; the implementation, market acceptance and success of SMX’s business model; developments and projections relating to SMX’s competitors and industry; and SMX’s approach and goals with respect to technology. These forward-looking statements are based on information available as of the date of this press release, and current expectations, forecasts and assumptions, and involve a number of judgments, risks and uncertainties. Accordingly, forward-looking statements should not be relied upon as representing views as of any subsequent date, and no obligation is undertaken to update forward-looking statements to reflect events or circumstances after the date they were made, whether as a result of new information, future events or otherwise, except as may be required under applicable securities laws. As a result of a number of known and unknown risks and uncertainties, actual results or performance may be materially different from those expressed or implied by these forward-looking statements. Some factors that could cause actual results to differ include: the ability to maintain the listing of the Company’s shares on Nasdaq; changes in applicable laws or regulations; any lingering effects of the COVID-19 pandemic on SMX’s business; the ability to implement business plans, forecasts, and other expectations, and identify and realize additional opportunities; the risk of downturns and the possibility of rapid change in the highly competitive industry in which SMX operates; the risk that SMX and its current and future collaborators are unable to successfully develop and commercialize SMX’s products or services, or experience significant delays in doing so; the risk that the Company may never achieve or sustain profitability; the risk that the Company will need to raise additional capital to execute its business plan, which may not be available on acceptable terms or at all; the risk that the Company experiences difficulties in managing its growth and expanding operations; the risk that third-party suppliers and manufacturers are not able to fully and timely meet their obligations; the risk that SMX is unable to secure or protect its intellectual property; the possibility that SMX may be adversely affected by other economic, business, and/or competitive factors; and other risks and uncertainties described in SMX’s filings from time to time with the Securities and Exchange Commission.

    EMAIL: info@securitymattersltd.com

    SOURCE: SMX (Security Matters)

    View the original press release on ACCESS Newswire

  • Search Influence Named One of 2025’s Best Women-Owned Businesses by New Orleans CityBusiness

    Search Influence Named One of 2025’s Best Women-Owned Businesses by New Orleans CityBusiness

    NEW ORLEANS, LA September 25, 2025 – PRESSADVANTAGE –

    Search Influence is proud to announce that it has been named one of the 2025 In the Lead: Best Women-Owned Businesses honorees by New Orleans CityBusiness. The special section, profiling recognized companies, will appear in the September 19, 2025, issue of CityBusiness.

    The recognition highlights Search Influence’s growth as a nationally recognized digital marketing agency and its commitment to creating a workplace where women lead, innovate, and thrive.

    This honor follows their recognition as an honoree in the 2025 CityBusiness Empowering Women Awards and builds on their legacy of being named five times to the publication’s Best Places to Work list.

    CityBusiness evaluates honorees based on business performance, innovation, workplace culture, and community engagement. Search Influence’s story reflects each of these qualities, with 75% of its leadership and 79% of its team comprised of women. The agency’s culture emphasizes mentorship, inclusion, and opportunity, offering flexible schedules, paid parental leave, and professional development programs designed to help employees grow personally and professionally.

    From its beginnings in a spare bedroom to its current standing as a nationally recognized agency, Search Influence has always believed that people are the foundation of lasting growth.

    The company invests in the community by hosting YouthForce interns each year, helping mentor the next generation of women interested in business, technology, and marketing.

    This award also highlights Search Influence’s role as a digital marketing innovator. The agency has been an early adopter of AI SEO strategies, ensuring clients appear in AI-powered search results like Google’s AI Overviews and conversational assistants. By combining these forward-thinking approaches with data-driven digital advertising and email marketing, Search Influence continues to deliver measurable results that keep clients competitive in a rapidly evolving digital environment.

    “Being recognized as one of the Best Women-Owned Businesses in New Orleans is a powerful reminder of why we do what we do,” said Angie Scott, Majority Owner and COO of Search Influence. “We’ve built a company where women thrive at every level, and where innovation and inclusion go hand in hand. This honor is a testament to the strength of our team, the trust of our clients, and the belief that when women lead, businesses and communities grow stronger.”

    As AI, search, and digital advertising continue to reshape the marketing landscape, Search Influence remains committed to helping clients thrive through strategies that blend human creativity with advanced analytics.

    This recognition by CityBusiness underscores the agency’s belief that innovation, inclusion, and community commitment are the true drivers of long-term success.

    Search Influence

    (504) 208-3900

    www.searchinfluence.com

    About Search Influence:

    Search Influence is a woman-owned, ROI-focused digital marketing agency that helps drive qualified prospects into and through the marketing funnel with innovative, analytics-backed search engine optimization and paid digital advertising solutions. Founded in 2006, Search Influence’s core purpose is to optimize potential and empower sustainable growth. The agency collaborates with well-regarded brands and institutions both nationally and locally in New Orleans, delivering measurable strategies carefully tailored to each client’s specific business goals. Clients include the Tulane School of Professional Advancement, Tufts University College, Associated Hearing Professionals, New Orleans & Company, and Audubon Nature Institute, among many other respected partner organizations.

    ###

    For more information about Search Influence, contact the company here:

    Search Influence
    Angie Scott
    (504) 208-3900
    info@searchinfluence.com
    1423 Pine St New Orleans, LA 70118

  • Bow Tie Solutions Enhances Residential Electrical Services with Advanced Surge Protection Systems

    Bow Tie Solutions Enhances Residential Electrical Services with Advanced Surge Protection Systems

    PEA RIDGE, AR September 26, 2025 – PRESSADVANTAGE –

    Bow Tie Solutions, an electrical contracting company, announces enhanced residential electrical services incorporating advanced surge protection systems and comprehensive safety protocols to address growing concerns about power fluctuations and electrical hazards in modern homes.

    The Pea Ridge-based company has expanded its residential service offerings to include whole-home surge protection installations, smart panel upgrades, and comprehensive electrical safety assessments. These enhancements come as homeowners increasingly rely on sensitive electronic devices and face rising instances of power surges from severe weather events and grid instabilities.

    Bow Tie Solutions Residential Electrician

    Bow Tie Solutions Residential Electrician services now encompass advanced diagnostic testing, preventive maintenance programs, and emergency response capabilities designed to protect both property and personal safety. The company’s team of licensed electricians has completed specialized training in the latest surge protection technologies and smart home integration systems.

    “Homeowners today face unique electrical challenges that didn’t exist even a decade ago,” said Bill Towler, Bow Tie Solutions. “From electric vehicle charging stations to home offices filled with expensive electronics, the modern home requires sophisticated electrical infrastructure and protection. Our enhanced services address these evolving needs while maintaining the highest safety standards.”

    The company’s comprehensive approach includes thorough inspections of existing electrical systems, identification of potential hazards, and implementation of customized solutions based on each home’s specific requirements. Services range from basic outlet replacements to complete panel upgrades and whole-home rewiring projects.

    Bow Tie Solutions Electrical Wiring expertise extends to both new construction and renovation projects throughout Benton, Madison, and Washington counties. The company’s technicians work closely with homeowners to ensure minimal disruption during service calls while maintaining strict adherence to National Electrical Code standards and local regulations.

    Recent industry data indicates that electrical failures cause thousands of residential fires annually, with many preventable through proper maintenance and modern protection systems. Surge events alone result in billions of dollars in property damage each year, affecting everything from major appliances to personal electronics.

    “Prevention is always more cost-effective than repair or replacement,” added Towler. “By investing in proper surge protection and regular electrical maintenance, homeowners can avoid costly damage and ensure their families’ safety. Our goal is to provide peace of mind through reliable, professional electrical services.”

    The enhanced residential services complement Bow Tie Solutions’ existing commercial and industrial offerings, including generator installation and maintenance, automated gate systems, and specialized welding services. This comprehensive service portfolio allows the company to serve as a single source for diverse electrical and mechanical needs.

    Bow Tie Solutions brings over four decades of experience to every residential project. The locally-owned company has built its reputation on reliability, expertise, and commitment to customer satisfaction. Licensed electricians undergo continuous training to stay current with evolving technologies and safety standards, ensuring clients receive the most effective solutions for their electrical needs.

    ###

    For more information about Bow Tie Solutions, contact the company here:

    Bow Tie Solutions
    Bill Towler
    (479) 426-4740
    hellowbowtiesolutions@gmail.com
    Bow Tie Solutions
    Pea Ridge, AR 72751

  • MOD-TRONIC Instruments Limited Announces Advanced Heating Solutions with MINCO SmartHeat Heater Technology

    MOD-TRONIC Instruments Limited Announces Advanced Heating Solutions with MINCO SmartHeat Heater Technology

    BRAMPTON, ON September 30, 2025 – PRESSADVANTAGE –

    MOD-TRONIC Instruments Limited, a distributor of high-quality manufacturers of Industrial Sensors, Transducers, Heaters, Controls, and Instrumentation, underscores its continued dedication to innovative thermal management technologies through the MINCO SmartHeat thin-film heater system. Recognized for its cutting-edge approach to heating applications, MOD-TRONIC emphasizes the significance of SmartHeat technology as a reliable, efficient, and self-regulating solution suited for the most demanding industrial and medical environments.

    The MINCO SmartHeat heater stands out as an exemplary model of advanced thermal regulation, functioning without the requirement for complex external controls or instrumentation. The core of this technology is a proprietary silicone matrix embedded with conductive carbon particles, engineered to deliver precise temperature control through a unique quantum tunneling phenomenon. As heat is generated, the silicone’s physical properties cause particles to shift, dynamically adjusting electrical resistance and modulating heat output on a point-by-point basis across the heating surface. This self-limiting characteristic ensures the heater maintains an optimal temperature, preventing overheating and thereby improving system longevity and efficiency.

    Steven Ruple, President of MOD-TRONIC Instruments Limited, elaborates on the technology’s advantages: “Our use of the MINCO SmartHeat SLT heater exemplifies MOD-TRONIC’s commitment to smart, sustainable solutions that simplify complex thermal challenges. The inherent ability of this heater to self-regulate removes the need for costly sensors or controllers, enabling our customers to deploy dependable heating systems with confidence and minimal maintenance.”

    This innovative heating solution has been embraced across a variety of demanding applications where precise temperature control is critical. In medical technology, for instance, SmartHeat ensures the warming and humidification of respiratory equipment, directly contributing to patient comfort and safety by maintaining consistent temperatures and reducing condensation risks. Similarly, the technology is instrumental in protecting sensitive reagents used in analytical chemistry, where temperature stability directly influences the accuracy and reliability of test results.

    In the transportation and aerospace industries, the benefits of the MINCO SmartHeat heater become particularly evident. Low-weight deicing applications on aircraft wings enhance safety during critical flight operations while reducing power consumption and reliance on traditional, heavier heating elements. The technology is also deployed in anti-icing measures for sensors and optical devices, such as infrared lenses and LED displays, ensuring their clarity and functionality in adverse weather conditions. By preventing ice buildup, SmartHeat maintains the integrity of signaling and monitoring equipment, which is essential for operational safety and efficiency.

    Industrial use cases further highlight the adaptability of SmartHeat technology. Valve warming solutions keep liquids flowing smoothly in environments where temperature fluctuations could otherwise cause blockages or damage, supporting continuous process control. Additionally, the system’s application in defrosting display panels ensures uncompromised visibility for critical control interfaces, which is essential in sectors where real-time data monitoring is vital.

    One of the key strengths of MOD-TRONIC’s integration of this technology is its plug-and-play design. Each heater is preconfigured to operate at a designated temperature and power output based on its unique design parameters. This eliminates the need for elaborate programming or calibration during installation, streamlining deployment and reducing setup time. The heater’s ability to adjust the distribution of heat precisely according to the immediate thermal load is instrumental in maintaining balance within a narrow temperature band, promoting operational consistency in fluctuating environmental conditions.

    MOD-TRONIC’s strategic emphasis on advanced heating technologies is backed by its longstanding history of providing instrument solutions that prioritize precision, reliability, and innovation. The integration of the MINCO SmartHeat heater within its product lines exemplifies a forward-thinking approach to thermal management challenges, setting a high standard for competitors and industry peers.

    “The continuous evolution of SmartHeat technology represents a pivotal advancement in how thermal challenges are addressed across industries,” Steven Ruple affirms. “At MOD-TRONIC, we are proud to integrate such innovative solutions that fundamentally enhance both product performance and user safety, embodying our commitment to excellence and customer satisfaction.”

    By championing the MINCO SmartHeat heater in its flexible heater lineup, MOD-TRONIC Instruments Limited not only strengthens its portfolio of reliable heating solutions but also solidifies its role as an industry leader dedicated to pioneering technologies that improve operational resilience and efficiency. This initiative reinforces the company’s vision of delivering intelligent, user-centric instruments that meet the demands of today’s high-precision thermal applications with unwavering quality and innovation.

    ###

    For more information about MOD-TRONIC Instruments Limited, contact the company here:

    MOD-TRONIC Instruments Limited
    Steven Ruple
    800-794-5883
    info@mod-tronic.com
    1 Delta Park Blvd #12Brampton, ON L6T 5G1

  • A&M Roofing Expands Metal Panel Roofing Solutions

    A&M Roofing Expands Metal Panel Roofing Solutions

    MCLEAN, VA September 25, 2025 – PRESSADVANTAGE –

    A&M Roofing, a McLean-based roofing contractor with over two decades of service in Northern Virginia, has expanded its metal panel roofing installations to meet growing demand for durable, energy-efficient roofing solutions throughout the region. The company reports a significant increase in requests for metal roofing systems as property owners seek long-term alternatives to traditional asphalt shingles.

    The expansion comes as Northern Virginia experiences increased severe weather events and homeowners prioritize roofing materials that offer superior longevity and weather resistance. Metal Panel Roofs have emerged as a preferred choice for both residential and commercial properties, offering lifespans that can exceed 50 years with proper maintenance compared to the 15-20 year typical lifespan of traditional roofing materials.

    Roof Repair

    “Property owners throughout Northern Virginia are recognizing that metal roofing represents a smart long-term investment,” said Mark Collins, senior roofing consultant at A&M Roofing. “The initial investment in metal roofing systems pays dividends through reduced maintenance costs, improved energy efficiency, and exceptional durability that stands up to our region’s variable weather conditions.”

    The company’s expanded metal roofing services include standing seam panels, corrugated metal options, and stone-coated steel systems. Each system is installed by certified technicians who have completed specialized training in metal roofing installation techniques. The expansion also includes enhanced inspection services using HAAG-certified technicians to assess existing roofs and determine optimal replacement timing.

    Roofers in Northern Virginia face unique challenges due to the region’s climate variations, from summer heat and humidity to winter ice and snow. A&M Roofing’s metal roofing solutions address these challenges through materials engineered to reflect solar heat in summer while providing superior insulation during winter months. The company reports that clients with metal roofs typically see energy cost reductions of 10-25 percent annually.

    The expanded service offerings come at a time when the roofing industry has seen technological advances in metal roofing materials, including improved coating systems that enhance durability and color retention. These developments have made metal roofing increasingly accessible to a broader range of property owners seeking alternatives to conventional roofing materials.

    Beyond metal roofs, A&M Roofing continues to provide comprehensive roofing services including new installations, complete replacements, storm damage repair, and routine maintenance. The company also offers gutter, siding, window, and door services to provide complete exterior solutions for property owners.

    A&M Roofing has served the Northern Virginia community for more than twenty years, establishing itself as a provider of residential and commercial roofing services. The company maintains full licensing and insurance coverage, with all technicians holding appropriate industry certifications. Based in McLean, the company serves property owners throughout Northern Virginia, providing roofing solutions backed by quality materials and professional installation standards. The company’s service portfolio encompasses both traditional and modern roofing systems, with specialized expertise in metal panel installations that meet current building codes and energy efficiency standards.

    ###

    For more information about A&M Roofing, contact the company here:

    A&M Roofing
    Mark Collins
    (703) 991-7910
    contactus@amroofingva.com
    A&M Roofing
    McLean, VA 22101

  • Ginza Diamond Shiraishi Hong Kong Reaffirms Dedication to Meaningful Wedding Rings and Craftsmanship

    Ginza Diamond Shiraishi Hong Kong Reaffirms Dedication to Meaningful Wedding Rings and Craftsmanship

    Causeway Bay, HK September 25, 2025 – PRESSADVANTAGE –

    Ginza Diamond Shiraishi Hong Kong today shared an expanded perspective on the evolving ideals and design considerations shaping 結婚戒指 (wedding ring) preferences among modern couples in the city. Drawing on direct client feedback, cultural context, and a heritage of Japanese artisanal values, the company emphasized how wedding rings are being reinterpreted to balance symbolism, wearability, and personal meaning.

    Wedding rings have long held a central role in matrimonial tradition as enduring tokens of commitment, unity, and shared life. In recent years, however, the factors influencing how couples choose them have broadened. No longer are rings judged merely by appearance or status; instead, durability, comfort, symbolic depth, and personal narrative are increasingly important. Ginza Diamond Shiraishi Hong Kong’s commentary reflects these shifting priorities, as the brand works to align its design and service approach with what couples now seek.

    結婚戒指 wedding ring

    A pronounced trend in Hong Kong’s bridal jewelry market is the rise of paired-ring design—rings for two that reference each other in form, texture, or motif, yet maintain unique individual elements. Rather than identical bands, couples may choose complementary finishes or mirrored details that subtly reflect their connection. Ginza Diamond Shiraishi Hong Kong noted that many clients now request such harmony in their ring sets, underscoring a desire for visual continuity that also celebrates individual identity.

    Material choice remains fundamental in ring selection, and clients are becoming more discerning about how rings perform in daily life. Metals such as platinum and high-karat gold alloys continue to be popular for their longevity, resilience, and hypoallergenic qualities. What has changed is the sensitivity to finishes, internal shaping, and edge design. Couples now often inquire about how a ring will feel on the finger over time, especially when worn alongside other jewelry or in varied daily activities. The internal curvature, band thickness, and polish finish are given greater scrutiny in consultations.

    Simplicity in design, paired with meaningful detail, is another clear movement. Rather than heavily ornamental styles, many couples show interest in minimalist bands that offer a singular accent—a small diamond, a delicate groove, or a hidden engraving. These features are frequently placed on surfaces that are not immediately visible, such as the inside of the band or along the edge, allowing a subtle intimacy between wearer and ring. Ginza Diamond Shiraishi Hong Kong identifies this as a reflection of a broader shift: couples want rings that carry private significance, not overt display.

    Hong Kong’s cultural environment also shapes how these preferences manifest. As a global hub where Eastern and Western aesthetics coexist, many couples gravitate toward designs that balance refinement with warmth. Requests for rose or muted gold tones, soft curves, or motifs referencing nature and heritage are increasingly common. The brand’s offerings aim to bridge the global and local sensibilities—designs that feel contemporary yet grounded in meaningful form.

    Craftsmanship and process transparency are being elevated as markers of trust. In the ring selection process, clients frequently ask detailed questions about how settings are secured, how matched rings align, and how finishes are maintained. Ginza Diamond Shiraishi Hong Kong affirms that quality control in stone setting, band symmetry, and polish consistency are integral to each piece’s longevity. As newer production techniques—such as laser engraving and precise casting—become more widely used, the brand emphasizes that these should support, not replace, hands-on inspection and finishing.

    Customization is growing more sophisticated than just engravings or metal choice. Prospective buyers now bring visual references from travel, art, or personal symbolism and seek to integrate them into ring elements such as edge textures, interior motifs, or subtle asymmetries. Visualization tools help clients preview these customizations before production. In Hong Kong, Ginza Diamond Shiraishi is continuing to expand such options, allowing couples to make choices that reflect intimate narratives while fitting within technical design constraints.

    Comfort and daily practicality are also high priorities. A ring must withstand movement, abrasion, and consistent wear without causing discomfort or snagging. Ginza Diamond Shiraishi Hong Kong reports that more clients ask about ergonomic design features, such as softened edges, well-proportioned thickness, and balance of weight. The way a ring interacts with daily wear—kitchen use, hand tools, gym equipment, and other rings—is frequently part of the selection dialogue.

    The expectation of long-term care has become part of the purchase discussion before the ring is even chosen. Couples often inquire about maintenance services—polishing, stone tightening, cleaning—and whether design choices will complicate upkeep over time. Flush or bezel settings, for example, are favored by those seeking easier maintenance. Ginza Diamond Shiraishi encourages clients to consider how their ring will age, not merely how it looks in the moment.

    Ethical considerations and transparency around material sourcing are no longer peripheral concerns. More clients wish to understand the origins of diamonds and metals, seek assurances of traceability, and favor conflict-free and environmentally responsible practices. Ginza Diamond Shiraishi Hong Kong affirms that each diamond is certified and that materials are sourced through trusted, standard-compliant channels. The brand is reinforcing documentation and communication about material provenance during consultations.

    These evolving preferences reflect a deeper transformation in how couples conceptualize wedding rings. Rather than viewing them as mere transactional objects or status symbols, many are approaching rings as lifelong companions that carry narrative, function, and emotional resonance. In Hong Kong’s fast-paced, cosmopolitan context—where individuals often lead visible public and private lives—durability, symbolism, comfort, and continuity all converge in how rings are experienced daily.

    To align with these developments, Ginza Diamond Shiraishi Hong Kong has taken steps to adapt its design and service models. The brand is dedicating more resources to flexible customization, enhancing transparency in material sourcing, and expanding consultation time to address wearability and long-term care. New designs introduced in the Hong Kong market incorporate paired sets with matching finishes, more interior texture options, and discreet symbolism that prioritizes meaning over ornamentation.

    Looking forward, Ginza Diamond Shiraishi Hong Kong anticipates further shifts in ring preferences. Advances in materials—such as scratch-resistant treatments or alternate metals—may gain greater attention. Digital tools like augmented reality ring previews, modular or adaptive ring components, and interactive design interfaces may become more central to decision making. Nevertheless, the brand emphasizes that its core commitment remains grounded in precision, care, and design integrity.

    Couples interested in learning more about Ginza Diamond Shiraishi Hong Kong’s wedding ring philosophy, design options, or consultation process may visit this site at https://pressadvantage.com/story/83028-ginza-diamond-shiraishi-hong-kong-presents-insights-into-wedding-rings-craft-meaning-and-evolving-pr

    ###

    For more information about Ginza Diamond Shiraishi Causeway Bay 銀座白石銅鑼灣, contact the company here:

    Ginza Diamond Shiraishi Causeway Bay 銀座白石銅鑼灣
    Mr. Shiraishi
    (852) 2787 0606
    admin@diamond-shiraishi.hk
    Shop G29-30, Fashion Walk, 11-19 Great George Street, Causeway Bay, Hong Kong